A full-size pinball machine weighs roughly 250 to 300 pounds, and a boxed Stern game is documented at over 250 pounds. Widebody games and some premium models run heavier, and a crate adds a few dozen pounds on top. The weight decides who you need for the move, which route into your house works, and what delivery involves. This guide gives the numbers, explains what changes them, and covers the questions that come with them: moving one, fitting it through doors, and how loud it will be.
TL;DR
- Most modern full-size machines land around 250 to 300 lb. Stern states that its machines weigh over 250 lb boxed.
- Crated weight is higher than uncrated weight. One documented Williams game was 280 lb uncrated and 300 lb crated.
- Plan on at least two people, a proper hand truck and a strap rated for the load. Take the backbox down and the legs off for tight routes.
- Stairs, turns and doorways matter more than floor strength in a normal home.
- A pinball machine is loud by design. Volume controls tame the speakers, not the coils and flippers, so room choice matters.
Table of Contents
- How much does a pinball machine weigh?
- Uncrated weight versus crated weight
- Size matters as much as weight
- Can two people move a pinball machine?
- Does a pinball machine need a reinforced floor?
- How loud is a pinball machine?
- What to ask before you buy for weight and delivery
- Why we plan around weight at Old Town Pinballs
- Ready to pick a machine?
- Our view on weight, delivery and getting it right
- FAQ
- Sources
How much does a pinball machine weigh?
The short answer is about 250 to 300 pounds for a standard full-size game. That is the range most buyers should plan around, and it matches what the manufacturer says. Stern’s own operation manual for Godzilla LE states that its machines weigh over 250 lb boxed and need at least two people to move and maneuver them.
That figure is a floor for the boxed game, not a ceiling for every machine. Weight depends on the cabinet format, the depth of the playfield, how many toys, ramps and mechanisms are under the glass, and what the head (the backbox) contains. Two machines that look similar from the front can differ by 30 or 40 pounds once you add a large lit topper, a metal-heavy playfield or an extra subway.
A few practical ranges to keep in mind:
| Type of machine | Typical weight | What to expect |
|---|---|---|
| Standard full-size modern game | About 250 to 300 lb | Two people, hand truck, strap |
| Widebody or feature-heavy game | Often more than 300 lb | Wider cabinet, harder doorways, plan extra help |
| Older electromechanical game | Varies, often lighter to handle | Heads often come off, which helps on stairs |
| Cocktail or compact format | Noticeably lighter | Still not a one-person job |
Treat the table as planning guidance. The exact weight of any game is in its manual or on its shipping paperwork, and that is the number to use for your move.
Uncrated weight versus crated weight
You will see two numbers for the same game, and they are not interchangeable.
Uncrated weight is the machine itself: cabinet, legs, backbox, playfield and glass. This is what you lift when the game is on your driveway or in your living room.
Crated or shipping weight includes the carton, foam, pallet or crate and any packed-in parts. It is the number a freight carrier bills against.
The gap is real but not huge. A 1988 PlayMeter trade listing for Williams’ Banzai Run gives 280 lb uncrated and 300 lb crated, so packaging added 20 lb for that model. Modern packaging varies, so expect a similar order of magnitude and check the manual for the game you are buying.
Why this matters when you buy:
- Freight quotes use the crated weight and dimensions. If you want to see what that does to the bill, our guide to pinball machine shipping cost walks through it.
- Your lift plan uses the uncrated weight, because that is what your helpers carry once the game is out of the box.
- Your vehicle needs to handle the crated size and weight if you pick up locally.
Size matters as much as weight
A 280-lb machine is manageable when it is the right shape and awkward when it is not. The Banzai Run spec lists a height of 79 inches with the backbox raised and 60 inches with it folded, with a cabinet 23.5 inches wide and 58 inches deep. Modern games are usually wider, so measure against the specific model.
Two things to remember:
- The height with the head up decides whether it fits a room. The height with the head folded decides whether it fits a vehicle or a stairwell.
- The cabinet width decides whether it fits through a door. Standard interior doors are often tight, and removing the door from its hinges can buy you the clearance you need.
Can two people move a pinball machine?
Yes, if they follow the manufacturer’s procedure. Stern is explicit in its manual: at least two people, proper equipment and extreme care. The same manual lists the steps. In plain terms:
- Remove the balls from the playfield so they do not roll around and damage it.
- Secure any loose mechanisms so nothing swings or shifts during the move.
- Fold the backbox down and strap it as the manual directs.
- Remove the legs as directed, usually after tipping the cabinet onto its back.
- Use a suitable hand truck and a strap rated for at least 500 lb.
- Never transport the machine in a vehicle with the backbox raised.
All of these come from the Stern operation and parts manual, and the manual for your own game is the final word on how that model comes apart.
Stairs, turns and tight spaces
Half the difficulty of moving a game is the route, not the weight. Walk the entire path before delivery day: curb, driveway, porch step, front door, hallway turn, stairs and the final room. Measure every doorway and the tightest corner.
Game Revolution’s home setup guidance makes the same point: in a normal home, access, stairs, turns, low headroom and handrails matter more than floor strength, and experienced movers are advisable for difficult routes. Basement installs are the classic case. Owners sometimes pull the playfield and backbox separately to get a game down narrow stairs, which turns one 280-lb problem into several smaller ones.
Some habits that make a move easier:
- Bring more help than you think you need. Three or four people turn a risky carry into a controlled one.
- Keep the machine on its back or on a strapped hand truck, never balanced on a single edge.
- Clear the path and take rugs up. Tripping while carrying 250 lb is how people get hurt.
- Wear gloves and sturdy shoes. Lift with your legs and keep the load close.
- If anyone feels a strain, stop and reset. The game is replaceable, a back is not.
Does a pinball machine need a reinforced floor?
For a normal home, usually not. One machine spreads its weight over four legs and a fairly large footprint, and the same Game Revolution guidance says floor loading is typically not the first concern. The practical limits are the route in and the size of the room.
For the room itself, the same guide suggests at least 36 inches wide by 80 inches deep as a minimum workable space, 42 by 84 inches as comfortable, and 48 by 90 inches as ideal. It also recommends checking ceiling obstacles, outlet access and the full delivery path. Leave room to stand at the front, to open the glass, and to reach the coin door and cabinet for service.

If you are placing a game in a business, such as a bar, a restaurant, a lobby or an arcade room, treat the same checklist as a minimum and add customer traffic. Games in public spaces need clear space around them, and a heavy machine is far safer against a wall than in a walkway.
How loud is a pinball machine?
Loud enough that room choice is part of the buying decision. Pinball games were built for bars and arcades, and that shows. Sound comes from many places, not only the speakers: coils firing, flippers striking, balls rolling and hitting metal, callouts, music, knockers, fans and cabinet vibration.
We do not have a single decibel figure that holds for every game, and it varies by model, volume setting and room. What you can plan around is the sources of the sound:
| Sound source | Can you turn it down? |
|---|---|
| Music and callouts | Yes, with the volume setting in the game menu |
| Coils, solenoids and flippers | Not through volume; these are physical sounds |
| Pop bumpers and drop-target resets | Not through volume |
| Ball movement | Not through volume |
| Cabinet vibration through the floor | Only by changing placement or the surface under the legs |
Owners in the Museum of the Game forum report that having the glass installed and the coin door closed trims some mechanical noise, while flippers, bumpers, solenoids and target resets stay hard to reduce. The same thread notes that impacts can carry through floors and thin walls, and that acoustic foam may tame reflections without truly soundproofing a room. Those are owner experiences, not lab measurements, so use them as a guide to where to look rather than a promise.
Where to put a machine so noise is not a problem
The most reliable fix is location. A basement, game room, garage or dedicated entertainment room works better than a space beside a nursery, home office or quiet TV area. If you only have a shared living space, play at sensible hours, keep the volume moderate and put the game against a solid wall away from shared bedrooms.
A few low-effort steps:
- Set the volume in the game menu to a level you can talk over.
- Keep the glass on and the coin door closed while playing.
- Place the machine on a solid floor surface, and level it so it does not rock.
- Avoid placing it directly under a bedroom.
- Do not tape, stuff or modify the inside of the cabinet to muffle it. Pinball mechanisms need airflow and free movement.
One more point from the beginner side: games with solid-state electronics let you turn the sound down, which helps in a shared house.
What to ask before you buy for weight and delivery
Weight should shape the purchase conversation as much as theme and price. Before you order, settle these points:
- Which model, and what does its manual say about weight and dimensions? Use that, not a general average.
- Where will it be delivered, and is the path measured? Include stairs, turns and door widths.
- Who is handling the machine on arrival? Confirm what the delivery service includes, and arrange helpers if it is curbside or doorway only.
- Do you need the backbox folded and the legs off for your route? Know how that model comes apart before the truck arrives.
- Is the room ready? Outlet nearby, clear floor, and a spot you have already checked for noise.
For trade-ins and swaps, the same logic applies in reverse. A heavy game going out of your house needs the same route planning as one coming in.
Why we plan around weight at Old Town Pinballs
We are an authorized dealer for brands including Stern Pinball and Spooky Pinball, and we deliver nationwide to the Lower 48. Delivery is where weight stops being a number and becomes a plan.
If you are comparing games, start with the pinball machines category and look at the brands and formats side by side. If you are curious about a specific theme or manufacturer, the Stern pinball machines and American Pinball pages are good starting points. Check the manual for the exact weight of any game you shortlist, and plan the route in before you place your order.
Ready to pick a machine?
We carry new and used machines from major brands, along with official accessories such as toppers, art blades and parts, plus a buy, sell and trade service. We accept Bitcoin and other cryptocurrency at checkout, and we deliver nationwide across the Lower 48. Browse the full pinball machine selection, or look at a model such as the Iron Maiden Pinball Pro by Stern and tell us about your space and your route so we can help you plan delivery.
If you want to see the range before you decide, the photo gallery shows our machines up close.
Our view on weight, delivery and getting it right
Weight is the first thing people ask about, and it is the right question. A pinball machine is a heavy, awkward, valuable object, and the best purchases are the ones where the buyer knew that before the truck arrived.
We sell new and used machines from the brands collectors and families actually want, and we are an authorized dealer for Stern Pinball and Spooky Pinball. That matters because the manufacturer’s own manual is the best source for how a game weighs, ships and comes apart. We work from those instructions, not from guesses.
Our advice is simple. Pick the game you love, measure the path, bring enough help, and fold the backbox down before you move anything. Tell us where it is going and we will help you think through delivery to the Lower 48. If you want to trade a machine in or sell one, we handle that too, with the same attention to how it travels.
Pinball is meant to be played, not lifted. A little planning means you spend delivery day setting up the first game instead of worrying about the stairs.
the author
FAQ
How much does a pinball machine weigh?
Most modern full-size machines weigh about 250 to 300 pounds. Stern states that its machines weigh over 250 lb boxed. Widebody and feature-heavy games can weigh more, so check the manual for the exact model.
Can two people move a pinball machine?
Yes, when they follow the manufacturer’s procedure with the right equipment. Stern requires at least two people, a suitable hand truck and a strap rated for at least 500 lb. The balls come out, the backbox is folded and strapped, and the legs come off as directed.
How tall is a pinball machine?
It depends on the game and whether the backbox is up or down. A Williams specification from 1988 lists 79 inches with the backbox raised and 60 inches folded. Check the dimensions for the model you plan to buy.
How loud is a pinball machine?
Loud enough that placement matters. Speakers can be turned down in the game menu, but coils, flippers, bumpers and rolling balls make physical noise that volume settings do not change. A basement, garage or game room is usually a better fit than a bedroom wall or a quiet living space.
Is crated weight the same as the machine’s weight?
No. Crated weight includes packaging, so it is higher. One documented Williams game was 280 lb uncrated and 300 lb crated. Freight is priced on the crated figure, while your lifting plan should use the uncrated one.
Sources
- Stern Pinball, Godzilla LE operation and parts manual
- PlayMeter, September 1988, Williams Banzai Run specification
- Game Revolution, how much room you need for a pinball machine at home
- Museum of the Game forum, how loud are pins


3 Responses